PLEASE NOTE: there are some delays with parcels from A+R. Our post is processed through Shepparton and unfortunately the distribution centre is experiencing delays. There is a current partial closure and the team there are operating with skeleton staff due to the local COVID cluster.

KATM Jeans Hardware - Black - Refill Kit V2.0

Regular price
Returning Soon!
Sale price
$36.00
Tax included.
Quantity must be 1 or more

Version two of the KATM Jeans Hardware kits contain easier-to-attach buttons with an internal guide inside the back of the button, and spiked nails so that each and every button should be a success.

Refill Kit including hardware without tools, for subsequent pairs of jeans. Pair these refill kits with one of the original Jeans Hardware Kits with the tools. 

We've chosen some beautiful metal finishes, taking inspiration from our favourite ready to wear looks in denim at the moment and paired them with a high quality Australian Made YKK zipper for our refill kits.

What's included in the kit?

Hardware for 1 pair of jeans:

1 x YKK locking jeans zipper nickel finish (MADE IN AUSTRALIA)

1 x Zipper "top stop" for use in shortening the zipper to a custom length

1 x Jeans Button and Nail 

6 x Rivets and standard nails (most RTW jeans have 6 or less rivets per pair)

2 x Longer rivet nails (for installing rivets on bulky coin pockets - you might not need these)

** THIS KIT DOES NOT CONTAIN THE TOOLS NECESSARY TO HAMMER THE RIVETS AND BUTTONS**

Please see the listing for the Full kit should you require the tools to be included. 

What size zipper should I choose?

If you have a pattern in mind, please check the specific details and required notions list within that pattern prior to purchase.

15 cm should work for Men's and Women's low rise and mid rise jeans.  It may also work for some smaller sizes of high waisted jeans. 

19cm for high waisted jeans in most sizes.

There is an extra top stop per zipper included, so if you need to shorten your zipper, you can do this at home.  You will need some pliers / metal snips etc.  After removing the required amount of teeth, clamp the top stop above the top zipper tooth to ensure you do not accidentally pull the zipper pull off the teeth altogether.